Streamlight LiteBox Dual Filament System Rechargeable Flashlight

Streamlight Flashlights are Portable, powerful, industrial-duty, rechargeable lantern with 90° swivel head let you aim the super-bright light in any direction. Comes with convenient recharging racks that do not require Streamlight LiteBox disassembly for charging. The battery is rated at a nominal 10 ampere-hours and is capable of being recharged up to 500 times and will power the lamp options for various run times.

Available in following models of Streamlight LiteBox Dual Filament System Rechargeable Flashlight

• Streamlight LiteBox Dual Filament Filament System Rechargeable Flashlight - 45705
• Streamlight LiteBox Dual Filament Filament System Rechargeable Flashlight - 45704

Features of Streamlight LiteBox Dual Filament System Rechargeable Flashlight

• High-intensity halogen bi-pin bulb available in 8 watt and 20 watt spot and flood. Xenon dual filament 8 watt safety bulb features instant backup beam
• Light Output in Candlepower and Lumens
• High-impact ABS thermoplastic housing with rubberized impact bumper, lens ring, and cushioned-grip handle
• Up to 9 hrs. continuous run time per charge depending on bulb type
• 11.5” (L) x 5.1” (W) x 7” (H)
• 7.4 lbs.
• Includes an 8 watt spot dual filament bulb for instant backup. AC and DC chargers, charge rack and shoulder strap.
• Available in international safety orange or high-visibility yellow.

Charging and Operation

To release the light from the rack, push the black bar down, slide the light forward and lift up. The Streamlight LiteBox will only fit one (1) way into the rack. The on/off switch is on the left side of the handle. A pair of charging indicators are on the opposite side underneath the information label. The red LED means that the light is charging. The green LED means it is fully charged and ready for use. It is important to understand that a battery can take from only minutes to a maximum of 24 hours to fully charge depending on the battery's residual charge and other factors. When fully charged, the red LED should turn "off" completely and the green LED should turn "on" steadily.

Charge your LiteBox overnight before first use. Charging will occur only when the lamp is “off.” While the lead-acid batteries supplied with the LiteBox have been specifically selected to tolerate deep discharges, the battery should be charged as soon as possible after use to ensure maximum service life. The batteries should never be "exercised" in an attempt to erase "memory" which never occurs with lead-acid batteries. The Power Failure lantern is intended to be used with an AC transformer. If you wish to mount the lantern in a vehicle and charge it with DC power, it should be wired so that charge power is always available. If connected through the ignition switch, the lantern may turn on when the ignition is switched “off.” The power failure function will work properly only with an AC source.